Having the facility to store data using the Synology DS1513+ and the Synology DS212 NAS units, means that I can relax knowing that I have access to all my data as and when I need it.
During the day the DS212 is used as the main workhorse, with the DS1513+ used to take all the backups of data from the DS212 on predefined time through the day. along with other devices on the network that all have their own space on the DS1513+.
At night, the DS1513+ unit is not really needed, but as it’s locked up in a secure location, going in to turn it off in the evening and back on in the morning would have been a real pain, but thankfully the Synology NAS devices have the option to set them to power down and power back up at predefined times.
While this all worked fine, I then found that I needed access to the data on the DS1513+ while the unit was powered off. Initially I thought I would just have to wait until the unit powered up in the morning, rather than having to unlock everything to get in and power it up early, but then I remembered that the LAN ports have an option for WOL (Wake On Lan), but had never gave it much thought… until now!
As my primary computer is an iMac, I decided to look around and see what would be required to wake the Synology NAS unit from being turned off. The help section on the Synology unit itself mentions applications to do this, but does not specify anything in particular, so the reliable Google search was undertaken to see what was there.
I have to say that for the Mac, I did find it difficult to find anything, but finally found a web site: http://www.readpixel.com/wakeonlan/ that had a FREE utility called WakeOnLan.
A quick download, and installation, and I was presented with a list of devices on the LAN. A simple click on the Synology device and tell it to wake up, and a few seconds later the unit was back up and running again!
To test it again, I went into the Synolgy unit, told it to shut down, waited, and then told it to start back up again using the utility, and it did so with ease! I did try and use the utility to put the Synology DS1513+ to sleep, but no matter what i tried it would not do this, so I just use the DSM interface to do this as usual.
So, if you are a Synology user with a Mac, and like to save a bit of money by turning things off, but have these items in a hard to get location, than have a look at WOL on anything you are using and check out this application to see if it will make things easier for you.
UPDATE: With the WakeOnLan software, go to preferences and make sure that the option to SCAN AFTER WAKEONLAN LAUNCH is not ticked once it has done it’s initial scan. If you have this on, once you turn the computer off and the NAS is asleep, when you restart the computer again it will not be able to find the NAS device. If that did happen with you, the way around this is to make sure you make a note of the IP address of the NAS unit as well as the MAC address of the unit as well. Once you have that, all you have to do is manually add the device to the WakeOnLan software and it will allow you to restart the NAS whenever you wish.
If you would like to see the video’s I have created of my Synology equipment please visit: